管状带式输送机在线纠扭托辊的研究与应用

管状带式输送机是一种新型环保的散状物料连续输送设备,在运行过程中受各种因素影响,头、尾过渡段经常会跑偏,管状段经常会扭转,常规停机调偏纠扭方法已不能胜任复杂路线长距离管带机稳定运行的要求。为适应市场发展趋势,设计人员分析了管带机扭转原因,结合纠扭基本原理及常规纠扭方法,新开发出一种在线(不停机)纠扭托辊并投入项目应用。     

Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

测井曲线标准化方法研究

由于长岭凹陷区经过近60年的勘探开发,再加上井场井眼条件的差异、测井系列、仪器刻度、测量时间及操作者不同等因素,使得各测井曲线存在系统误差。因此在开展储层参数研究和有效厚度划分时,为消除这些非地层因素对原始资料的影响,有必要对测井曲线进行标准化,以保证解释结果的合理性与可靠性。测井曲线标准化方法可以分为定性和定量两种类型。其中定性方法主要包括直方图法标准化校正、均值法标准化校正和重叠图法标准化校正;定量方法则为趋势面分析校正法。本论文利用Matlab软件,采用趋势面方法对研究区域内的井进行测井曲线标准化。结果表明经过趋势面法标准化校正能够消除不利因素,准确的提取出测井曲线中的各种有用地质信息。     

An efficient nonlinear polynomial color characterization method based on interrelations of color spaces

A well-known color characterization method is to take an image of a color chart and then to find the mapping matrix from the digital RGBs to the corresponding known CIEXYZs. However, the prediction errors are generally large in CIELAB color space because of the nonlinear transformation from CIEXYZs to CIELABs. In this article, we propose an efficient and simple nonlinear method for the color characterization of input devices. The approach for deriving a colorimetric mapping between digital RGB signals and CIELAB tristimulus values uses the polynomial modeling by considering the interrelations among the standard CIE color spaces. Furthermore, to improve the accuracy of solution, we take the polynomial root terms extension. Our algorithm is simple to implement because only a least-squares mapping should be solved. Various computational results are given to demonstrate the efficiency and capability of the proposed method.     

Modified transform-based gamma correction for MRI tumor image denoising and segmentation by optimized histon-based elephant herding algorithm

Medical image processing is typically performed to diagnose a patient's brain tumor prior to surgery. In this study, a technique in denoising and segmentation was developed to improve medical image processing. The proposed approach employs multiple modules. In the first module, the noisy brain tumor image is transformed into multiple low- and high-pass tetrolet coefficients. In the second module, multiple low-pass tetrolet coefficients are applied through a modified transform-based gamma correction method. Generalized cross-validation is used on multiple high-pass tetrolet coefficients to obtain the best threshold value. In the third module, all enhanced coefficients are applied to the partial differential equation method. In the final module, the denoised image is applied to Atanassov's intuitionistic fuzzy set histon-based fuzzy clustering method with centroid optimization using an elephant herding method. Accordingly, the tumor part is segmented from the nontumor part in the magnetic resonance imaging brain images. The method was assessed in terms of peak signal-to-noise ratio, mean square error, specificity, sensitivity, and accuracy. The experimental results showed that the suggested method is superior to traditional methods.     

Analysis and improvement of the influence of sample shape on Pu measurement results

ABSTRACT

The analysis method of Fast Neutron Multiplicity Counting (FNMC) plays an increasingly important role in the measurement of nuclear material properties. Based on the assumption of point model, fast neutron multiplicity measurement equation is derived which can be used to measure the mass of Pu sample. However, the deviation of the simulated measurement of 1 kg Pu sample reaches 16.6% and increases with mass. Because nonpoint source samples of different shapes do not fully satify the hypothesis. To correct this deviation, a set of fast neutron multiplicity counters was built by Geant4 to simulate and study the mass attribute of Pu samples.The cylindrical sources of different shapes and different masses were simulated, the self-multiplication factor and α coefficient were corrected.And the corresponding third-order polynomial fitting equation was obtained, the goodness of fit was greater than 0.970. In the same way, the spherical and spherical shell source samples in the mass range of 0–5 kg were analyzed, the corrected mass deviation of samples was less than 10% in this interval. The results show that the combination of the fast neutron multiplicity counter and parameter correction can accurately measure the sample mass attribute.     

我国印染助剂30年发展进程

我国助剂工业始于20世纪50年代,70年代开始发展,品种遍及漂、染、印、整,基本上满足纺织印染需要.但不论产量还是品种数量都还远远落后于工业发达国家.90年代开始,产量大幅上升,品种亦趋齐全,有些品种的研究和开发逐渐缩短了与国外的差距.随着纺织品与服装的高档化,对印染助剂质量与品种提出了更高的要求,促使国内助剂工业开发更多新产品以满足需求.     

大水深测量校正方法研究与应用

水库水深测量精度直接关系到水库的防洪安全与蓄水兴利。现有回声测深仪无法应对大水深施测的情况，且测量受到水库水温分层影响。利用回声测深仪配合校正标进行大水深测量的校正方法，能够精确检测到回声测深仪水深测量的误差及差值、系统延时问题等，通过与各级校正标的真值比较、修正，能使测值近似真值,且使误差控制在容许范围内。介绍了水深校正标基本原理、操作方法和步骤以及在水库测深中的应用。     

A fast experimental beam hardening correction method for accurate bone mineral measurements in 3D μCT imaging system

Bone mineral density plays an important role in the determination of bone strength and fracture risks. Consequently, it is very important to obtain accurate bone mineral density measurements. The microcomputerized tomography system provides 3D information about the architectural properties of bone. Quantitative analysis accuracy is decreased by the presence of artefacts in the reconstructed images, mainly due to beam hardening artefacts (such as cupping artefacts). In this paper, we introduced a new beam hardening correction method based on a postreconstruction technique performed with the use of off‐line water and bone linearization curves experimentally calculated aiming to take into account the nonhomogeneity in the scanned animal. In order to evaluate the mass correction rate, calibration line has been carried out to convert the reconstructed linear attenuation coefficient into bone masses. The presented correction method was then applied on a multimaterial cylindrical phantom and on mouse skeleton images. Mass correction rate up to 18% between uncorrected and corrected images were obtained as well as a remarkable improvement of a calculated mouse femur mass has been noticed. Results were also compared to those obtained when using the simple water linearization technique which does not take into account the nonhomogeneity in the object.     

Availability growth models and verification of power equipment

The general availability growth models for large scale complicated repairable system such as electric generating units, power station auxiliaries, and transmission and distribution installations are presented. The calculation formulas for the maintenance coefficient, mathematical expressions for general availability growth models, ways for estimating, and fitting on checking the parameters of the model are introduced. Availability growth models for electric generating units, power station auxiliaries, and transmission and distribution installations are given together with verification examples for availability growth models of 320–1000 MW nuclear power units and 1000 MW thermal power units, 200–1000 MW power station auxiliaries, and 220–500 kV transmission and distribution installations. The verification results for operation availability data show that the maintenance coefficients for electric generating units, power station auxiliaries, transmission and distribution installations conform to the power function, and general availability growth models conform to rules of availability growth tendency of power equipment.